McQuay MicroTech II N2 Installation And Maintenance Manual page 3

Aaf hermannelson unit ventilator controller n2 open communication modules
Table of Contents

Advertisement

Limited Warranty
Consult your local McQuay Representative for warranty details. Refer to Form 933-43285Y. To find
your local McQuay Representative, go to www.mcquay.com.
Revision History
IM 732
Reference Documents
Number
OM748
OM749
OM750
OM751
OM752
OM753
OM754
OM755
OM756
OM757
OM758
ED 15069
ED 15065
IM731
IM747
www.johnsoncontrols.com/Metasys/n2open.htm
Notice
Copyright © 2002 McQuay International, Minneapolis MN All rights reserved throughout the world
™ The following are trademarks or registered trademarks of their respective companies: N2 Open from Johnson Controls
Corporation, Protocol Selectability, MicroTech II, and AAF-HermanNelson from McQuay International.
IM 730-0
August 1, 2002
Initial Release
Source
www.McQuay.com
Air Source Heat Pump with Electric Heat (Software Model 00)
www.McQuay.com
Water Source Heat Pump with Electric Heat (Software Model 02)
Water Source Heat Pump without Electric Heat (Software Model 03)
www.McQuay.com
DX Cooling with Electric Heat (Software Model 04)
www.McQuay.com
DX Cooling Only (Software Model 05)
www.McQuay.com
Electric Heat Only (Software Model 06)
www.McQuay.com
DX Cooling with Wet Heat - Valve Control (Software Model 07)
DX Cooling with Wet Heat - F&BP Damper Control (Software Model 08)
www.McQuay.com
2-pipe Wet Heat Only - Valve Control (Software Model 09)
2-pipe Wet Heat Only - F&BP Damper Control (Software Model 10)
www.McQuay.com
2-pipe Heat/Cool - Valve Control (Software Model 11)
2-pipe Heat/Cool - F&BP Damper Control (Software Model 12)
www.McQuay.com
4-pipe Heat/Cool - Valve Control (Software Model 13)
4-pipe Heat/Cool - F&BP Damper Control (Software Model 14)
www.McQuay.com
2-pipe Cooling Only - Valve Control (Software Model 15)
2-pipe Cooling Only - F&BP Damper Control (Software Model 16)
www.McQuay.com
2-pipe Cooling with Electric Heat - Valve Control (Software Model 17)
2-pipe Cooling with Electric Heat - F&BP Damper Control (Software Model 18)
www.McQuay.com
MicroTech II™ Unit Ventilator Unit Controller
Protocol Implementation Conformance Statement
www.McQuay.com
MicroTech II™ AAF®-HermanNelson® Unit Ventilator Unit Controller Protocol
Information
www.McQuay.com
MicroTech II™ AAF®HermanNelson® Unit Ventilator Controller BACnet®
Communication modules
www.McQuay.com
MicroTech II™ Unit Ventilator Unit Controls Installation Manual
Title
N2 -- A Data Communication Protocol for Building Automation and
Control Networks
3

Advertisement

Table of Contents
loading

Table of Contents