Table of Contents
Advertisement
Installation
2
Align the HDSL card with the black guide lines on the top and bottom edges of the slot, then push the card
in until its front panel is flush with the front of the shelf
EMS-830T
LTU or UTU HDSL Card
3
Tighten the two captive retaining screws on the front of the LTU or UTU HDSL card.
EMU cards are installed in the same manner as an LTU or UTU HDSL card. However, an
EMU card must be installed into the right most slot of the shelf (see
12
Figure 5. Installing an LTU or UTU HDSL Card
January 31, 2003
(Figure
5).
W0205-A
Figure 1 on page
LTPE-UM-3157-01
1).
EMS-830T
Advertisement
Table of Contents
