Rear View Of The Ems-830T - ADC WorldDSL EMS-830T User Manual

Overview
All wiring for the EMS-830T is on the back of the shelf (see
Table 1 on page 3.
10Base-T port
RS-485 (DB25)
connector
Alarm (Db25)
connector
Before disconnecting any cables that are attached to the HDSL connectors, be sure to
completely loosen the screws that secure the cable.
2
EXT CLK
(External clock port)
50-pin HDSL Telco
connector (slots 9-16)
Figure 2. Rear View of the EMS-830T
January 31, 2003
Figure 2). EMS-830T features are described in
Five-position -48 Vdc
power terminal strip
16 BNC 75-ohm
G.703 IN connections
16 BNC 75-ohm
G.703 OUT connections
Protection switch
module connectors (8)
LTPE-UM-3157-01
50-pin HDSL Telco
connector (slots 1-8)
W0202-A
EMS-830T