Searching For Your Code - Universal Electronics MediaRemote User Manual

Media Remote Rev 1.fm Page 12 Monday, October 3, 2005 4:12 PM
NOTE: You must also change the address
on the SimpleCenter application.
Note the PC address being used
below:
To change the address on the
SimpleCenter application:
1. Open SimpleCenter on your PC
2. Click Settings at the top.
3. Click Theater in the Settings dialog
box.
4. Select the channel number that
corresponds to the channel you just
programmed on your
MediaRemote.
5. Click OK.

SEARCHING FOR YOUR CODE

If your home entertainment device does
not respond to theMediaRemote with
SimpleCenter after trying all of the codes
listed for your brand, or if your brand is
not listed at all, try searching for your
code.
The first digit of any device code you
enter indicates the type of device:
Digit Device Type
0 Cable converter or
satellite receiver
1 TV
2 DVD player or PVR
3 Audio amplifiers,
amplifier/tuners, Home-
Theatre-in-a-Box
systems.
4 Dedicated PC
NOTE: You cannot search for codes for
the PC key; that key is reserved for
receiver use.
NOTE: If more than 10 seconds pass
between key presses, the remote
exits programming.
1. Turn on the device.
2. Press and (rewind and fast
forward) at the same time until the
power key blinks twice.
3. Enter 9 9 1.
12