Installing Batteries; Programming Device Control - Universal Electronics MediaRemote User Manual

Universal remote control with simplecenter
Table of Contents

Advertisement

Media Remote Rev 1.fm Page 9 Monday, October 3, 2005 4:12 PM
Controls these types of
Device Key
devices
Any home entertainment
device, depending on
the code you choose.
Any home entertainment
device, depending on
the code you choose.

INSTALLING BATTERIES

1.
On the back of the remote control,
push the tab and lift off the battery
cover.
2.
Locate the two (2) enclosed AAA
batteries. Match the + and - marks
with those in the battery case, then
insert them.
3.
Align the cover's keys with the
case's holes and press the cover
back into place. The tab should
click when the cover is locked.
NOTE: Replace the batteries when
MediaRemote with SimpleCenter
stops performing acceptably.

PROGRAMMING DEVICE CONTROL

The MediaRemote with SimpleCenter is
preprogrammed to operate a Sony TV, a
Pioneer Audio Amplifier/Tuner, and a
Motorola cable converter. To control
devices other than the default brands,
perform the following steps; otherwise
skip this section.
NOTE: As noted in "Device Table" on
page 8, any device key may be
9

Advertisement

Table of Contents
loading

Table of Contents