Set Low Speed Limit - Powermatic WP2510 Operating Instructions And Parts Manual

8. Set Low Speed Limit

This function defines the speed level which is considered abnormal for the machine.
When the Controller starts the table movement up or down, and the table does not
move, or moves with a speed lower than defined, it stops the machine and displays:
Press to clear.
To set low speed limit:
Step 1: Press
Display
Step 2: Enter the low speed level 0 to 99
0 = Machine test is disabled
1 = very low
:
:
99 = high
Step 3: Press to confirm or press
28
..........................[default]
to clear.