4. Select Counting direction
You can select the counting direction according to the table movement.
Step 1: Press
Display
Step 2: Press
"-dir" numbers decrease as table rises (accords with scale on planer).
"dir-" numbers increase as table rises.
Step 3: Press
5. Select Positioning Mode
Step 1: Press
Step 2: Press
a. ---| |---
b. ---|
c. |---
Step 3: Press
to change the direction.
to confirm or press
to select.
both directions
left
right
to confirm or press
.......................[default]
to clear.
to clear.
26