Honda FIT 2014 Owner's Manual page 54

12/04/18 14:35:06 42TF2C00_054
ATTACHING CLIP
ANCHOR FITTING
Route the tether strap over the
7.
head restraint, then attach the
attaching clip to the tether anchor
fitting in the ceiling as shown in
the illustration. Make sure the
strap is not twisted, then tighten
the strap according to the child
restraint system maker's
instructions.
ATTACHING CLIP
ANCHOR FITTING
On some child restraint types,
route the tether strap as shown.
Installing a Child Restraint System
8. Push and pull the child restraint
system forward and from side-to-
side to verify that it is secure.
The design and suitability of the
child restraint systems must be
carefully checked with the child
restraint system manufacturer
concerned and the seller of those
systems. If you are not sure, consult
your dealer before purchasing this
type of child restraint system.
Driver and Passenger Safety
49