Honda FIT 2014 Owner's Manual page 286

12/04/18 15:05:48 42TF2C00_286
BLADE
REINFORCEMENT
Examine the new wiper blade. If it
5.
has no plastic or metal
reinforcement along the back
edge, remove the metal
reinforcement strips from the old
wiper blade and install them in the
slots along the edge of the new
blade.
Slide the new blade into the holder.
6.
Make sure it is engaged in the slot
along its full length.
7. Insert both ends of the blade into
the holder. Make sure they are
secure.
Wiper Blades
8. Install the wiper blade assembly
onto the wiper arm. Make sure it
locks in place.
9. Lower the wiper arm against the
window.
Maintenance
281