Honda FIT 2014 Owner's Manual page 111

12/04/18 14:42:34 42TF2C00_111
Multi-Information Display
If you fail to enter your selection,
you will see ''SETTING
INCOMPLETE'' on the display for a
few seconds. The display returns to
the setting mode. Repeat the setup.
To exit the customizing mode, select
the exit mode by pressing the INFO
button repeatedly, then press the
SEL/RESET button. The display
goes back to the ''METER SETUP''
display.
106
Instruments and Controls
Elapsed Time Reset
To cause the elapsed time to reset
every time you turn the ignition
switch to the LOCK (0) position or
reset trip meter A or B, adjust it as
described as follows.
While the multi-information display
is showing ''ELAPSED TIME
RESET,'' press the SEL/RESET
button. The display changes to the
setting display.
You can select ''IGN OFF,''
''TRIP A,'' or ''TRIP B.'' Each time
you press the INFO button, the
selected mode switches between
them and exit. Enter your selection
by pressing the SEL/RESET button.