Honda FIT 2014 Owner's Manual page 276

12/04/18 15:04:26 42TF2C00_276
4. Turn on the position lights and
check that the new bulb is
working.
5. Put the licence light assembly
back into the tailgate, the right
edge first. Push the assembly to
the left until it stops.
Replacing a Front Fog Light Bulb
Your vehicle uses halogen light
bulbs. When replacing a bulb, handle
it by its plastic case, and protect the
glass from contact with your skin or
hard objects. If you touch the glass,
clean it with denatured alcohol and a
clean cloth.
Halogen light bulbs get very hot
when lit. Oil, perspiration, or a
scratch on the glass can cause the
bulb to overheat and shatter.
F F O O G G L L I I G G H H T T C C O O V V E E R R
C C O O V V E E R R
Put a cloth on the edge of the
1.
cover to prevent scratches.
Remove the cover from the front
bumper by using a flat-tip
screwdriver or some other flat tool.
2. To remove a front fog light cover,
use a Phillips-head screwdriver to
remove the screw. Pull the screw
side of the fog light cover, then
carefully pull it out of the bumper.
CONTINUED
Maintenance
Lights
271