Cisco UCS Administration Manual page 36

Table 3-4
Field
Host Name
Simple Mail Transfer Protocol (SMTP) ServerEnter SMTP address. Used to transmit
SMTP Username
Autosupport CC Address
Send from Domain
Proxy URL/IP
Proxy Port
Network Time Protocol (NTP) Server
Time Zone
Table 3-5
Cisco UCS Invicta Scaling System Administration and Configuration Guide, Version 5.0.1.1a
3-12
Support Settings Fields
displays the button functionality that is available on the Support Settings page.
Description
Name assigned to the system.
email across IP Networks. This is applicable only
for email being sent directly from the Cisco
Scaling System if there is no connection to the
Autosupport server over the Internet.
The SMTP user is the username used by the mail
service to send out emails from the customer's
servers.
User mail server needs to be set up to handle
customer emailing.
Enter the internal customer address to which
copies of Autosupport messages are sent.
The Firewall must be configured to allow access
to Port 443 outbound.
Applies only when emails are being sent directly
from the Cisco Scaling System if there is no
connection to the Autosupport server over the
Internet.
The proxy server that the customer uses to direct
outgoing requests.
The port number used when sending outgoing
requests.
Enter the NTP address. Used to synchronize the
time of the clocks of computers over the network.
Time ZoneChoose location (and its associated
time zone) from the drop-down list.
Choose a location (and its associated time zone)
from the drop-down list.
Chapter 3 SSR Configuration