Table of Contents
Advertisement
Be sure to read and acknowledge the Release Notes and Instructions or the update will not initiate.
Note
Caution
Should you encounter any error or issue during the upgrade process, please contact Support before trying
to uninstall the update. Doing so could potentially cause data integrity and/or performance issues.
Only customer-installed upgrades can be potentially uninstalled.
Uninstall Update
The Uninstall Update button is visible immediately after the update was installed and is used for rolling
back previously installed update.
This button is only visible if a user is permissioned to uninstall an update.
Shutdown
Click Shutdown to shutdown the Cisco UCS Invicta Scaling System. A dialog box appears to verify the
Shutdown command to avoid any unintentional action.
Reboot
Click Reboot to reboot the Cisco UCS Invicta Scaling System. A dialog box appears to verify Reboot
command to avoid any unintentional action.
A device reboot is required to complete an upgrade. Ensure that all hosts are disconnected from the
Caution
device so that no IO is running during the upgrade installation.
Alert Admin
The Alert Admin menu lists active alerts sent during periodic system checks. The alert entries include a
short identification, last sent time and date, and status information.
To access the Alert Admin window, do one of the following:
•
•
The Alert Admin window appears.
Address Alert
To address an alert:
Do one of the following from the Alert Admin window:
Step 1
•
•
Cisco UCS Invicta Scaling System Administration and Configuration Guide, Version 5.0.1.1a
3-14
Click the Alerts icon on the Home window.
Choose SSR Configuration > Alert Admin.
Mouse over a unique alert.
Use the check box to choose one or more alerts.
Chapter 3
SSR Configuration
Advertisement
Table of Contents
