Dns Nameservers; Static Routes - Cisco UCS Administration Manual

The Network Setting window appears.
Click Default Gateway.
Step 2
The Update Default Gateway dialog box appears.
Enter the Gateway IP address.
Step 3
A check mark appears if the gateway is valid.
Click Save Gateway or click Cancel to return to the Network Settings window.
Step 4

DNS Nameservers

The most important function of the Domain Name Server DNS servers is the translation (resolution) of
human-memorable domain names and hostnames into the corresponding numeric Internet Protocol (IP)
addresses.
To edit the Nameservers, do the following:
Choose SSR Configuration > Network Settings.
Step 1
The Network Setting window appears.
Step 2 Click DNS Nameservers.
The Edit DNS Nameservers dialog box appears.
Step 3 Enter the DNS Nameserver IP addresses.
Click Save DNS or click Cancel to return to the Network Settings window.
Step 4

Static Routes

Static routes are routes through a data network that are described by fixed paths (statically). To create a
static route, do the following:
Choose SSR Configuration > Network Settings.
Step 1
The Network Setting window appears.
Click Static Routes.
Step 2
The Static Routes window appears.
Add Static Route
To create a new static route for an active bond, do the following:
Choose SSR Configuration > Network Settings.
Step 1
The Network Setting window appears.
Step 2 Click Static Routes > Add Static Route.
Cisco UCS Invicta Scaling System Administration and Configuration Guide, Version 5.0.1.1a
3-4
Chapter 3 SSR Configuration