Physical Space Alerts; Iscsi Settings; Changing Initiator Ip Address Availability - Cisco UCS Administration Manual

Invicta scaling system
Hide thumbs Also See for UCS:
Table of Contents

Advertisement

Prediction strengths of high, medium and low probability are based on the quantity of data points and
regression analysis validation. If enough data has been collected, the Storage Trend graph draws a
statistically valid regression line, for example, 30 days of data points yields a prediction probability with
a high strength.
Trend calculations without sufficient or with inconsistent data points will be calculated, but can be
statistically weaker or inconclusive. If a calculation cannot be made based on the data points, a message
appears to indicate this status.

Physical Space Alerts

The status of physical space is monitored on an hourly basis. Alerts are triggered at the capacities and
frequencies listed in
Alert Admin. Alerts are also sent to Autosupport and to the additional addresses provided in the
Autosupport CC field on the Support Settings window. For information on alerts and how to suppress
them, see See "Uninstall Update" on page 14.

iSCSI Settings

The iSCSI Screen Lists the IP addresses by which an Initiator (a host) is allowed to access the Cisco
UCS Invicta Scaling System SSR.The two columns represented in the window are:

Changing Initiator IP Address Availability

Choose SSR Configuration > iSCSI Settings.
Step 1
The iSCSI Information window appears.
Use the drag-and-drop functionality to move an Initiator to or from the Available and the Allowed Portal
Step 2
IP addresses columns.
If the Allowed Portals column is empty, there are no restrictions for access and all IPs listed in the
Note
Available column can be used for iSCSI communication
Cisco UCS Invicta Scaling System Administration and Configuration Guide, Version 5.0.1.1a
3-10
Table
3-3. These messages can be viewed from the SSR Configuration menu under
Table 3-3
Percent Full Frequency Sent
70
80
85
Allowed Portal: Lists IP addresses to which a host is allowed to connect.
Available Portal: Lists all available IP addresses of hosts that can used to initiate a session.
Capacity Alerts
Once
Once
Once per hour
Chapter 3
SSR Configuration

Advertisement

Table of Contents
loading

Table of Contents