Ssr Configuration; Network Settings - Cisco UCS Administration Manual

Invicta scaling system
Hide thumbs Also See for UCS:
Table of Contents

Advertisement

SSR Configuration

This section covers topics related to the Cisco UCS Invicta Scaling System SSR configuration:

Network Settings

Modifying network settings will cause a brief interruption of connectivity to the Cisco UCS Invicta
Caution
Scaling System. Use extreme caution when changing the settings on this window.
The Network Settings menu window displays the Ethernet Bond Status table. This is a sortable list of all
bonds currently available on this Cisco UCS Invicta Scaling System. It also displays a sortable list of
Fibre Channel interfaces. Right clicking an interface presents menu options, for example, enable/disable,
and so on.
The top buttons on this window can be clicked to create a new network interface bond, set a default
gateway, set the DNS servers, and set static routes.
This section describes how to create, edit, and remove a bond and explains the available bonding modes.
Caution
Bond0 must not be deleted. Changing bond0 can potentially sever the Cisco UCS Invicta Scaling System
connection.
Network Settings, page 3-1
Default Gateway, page 3-3
MPIO Settings, page 3-8
iSCSI Settings, page 3-10
Error Correction, page 3-11
Support Settings, page 3-11
System Update, page 3-13
Uninstall Update, page 3-14
Cisco UCS Invicta Scaling System Administration and Configuration Guide, Version 5.0.1.1a
3
C H A P T E R
3-1

Advertisement

Table of Contents
loading

Table of Contents