Diagnostic Schedule - Cisco ASR 14000 Series Command Reference Manual

Diagnostics Commands on Cisco IOS XR Software

diagnostic schedule

To configure the diagnostic schedule, use the diagnostic schedule command in administration
configuration mode. To disable the diagnostic schedule, use the no form of this command.
Syntax Description location node-id
test
id
all
basic
non-disruptive
daily
on month day year
weekly day-of-week
hour:minute
Defaults
No default behavior or values
Command Modes
Administration configuration
Command History Release
Release 3.7.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
Use the diagnostic schedule command to schedule diagnostic tests for a specific location.
OL-17228-01
diagnostic schedule location node-id test {id | all | basic | non-disruptive} {daily | on month day
year | weekly day-of-week} hour:minute
no diagnostic schedule location node-id test {id | all} {daily | on month day year | weekly
day-of-week} hour:minute
Schedules a diagnostic test for a specified location.
Specifies a specific diagnostic test, or all diagnostic tests.
Test ID or list of test IDs, as shown in the show diagnostic content
command. Multiple tests can be listed if separated by semicolons (;) as
follows:
•
Specifies all tests.
Specifies the basic on-demand test suite [Attribute = B].
Specifies the nondisruptive test suite [Attribute = N].
Specifies a daily schedule.
Schedules an exact date.
Specifies a weekly schedule with a set day of the week. Enter the name of a
day of the week or a number that specifies a day of the week in the range
from 0 through 6.
Scheduled start time, where hour is a number in the range from 0 through 23,
and minute is a number in the range from 0 through 59.
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Cisco ASR 14000 Series Router Interface and Hardware Component Command Reference
x;y-z (for example: 1; 3-4 or 1;3;4)
diagnostic schedule
HR-43