Administration - Diagnostic - Cisco RV220W User Manual

Administration - Diagnostic

Ping Test Parameters
Ping Target IP
Ping Size
Number of Pings
Ping Interval
Ping Timeout
Start Test
Ping Result
Traceroute Test Parameters
Traceroute Target
Start Test
Cable Diagnostic
Port
Figure 50: Diagnostic Screen
Enter the IP address or URL that you want to ping.
Enter the size of the packet you want to use.
Enter the number of times you wish to ping the target device.
Enter the time period (milliseconds) between each ping.
Enter the desired time period (milliseconds). If a response is not
received within the defined ping period, the ping is considered to
have failed.
Click this button to begin the test. A new screen will appear and
display the test results.
Displays the Ping status.
Enter the target IP address for the traceroute test.
Click this button to begin the test. A new screen will appear and
display the test results.
Select the port number from the drop-down menu.
83