Advantech PCA-6743 User Manual page 44

Note! This "Integrated Peripherals" option controls the configuration of the
board's chipset, includes IDE, ATA. This page is chipset dependent.

On-Chip Primary/Secondary IDE
This item enables chipset IDE device 1 of controller.

Master PIO [Auto]
This item allows user to adjust master IDE mode of type for modification pur-
pose. Bios default value suggest to "Auto".

Slave PIO [Auto]
This item allows user to adjust slave IDE mode of type for modification purpose.
Bios default value suggest to "Auto".

Master Ultra DMA
This item allows user to do auto detection/disable primary master IDE ultra DMA
mode. Bios default value suggest to set as [Auto].

Slave Ultra DMA
This item allows user to do auto detection/disable primary slave IDE ultra DMA
mode. Bios default value suggest to set as [Auto].

Master UDMA Mode
This item allows user to adjust primary master IDE mode of type for modification
purpose. Bios default value suggest to "Auto".

Slave UDMA Mode
This item allows user to adjust primary slave IDE mode of type for modification
purpose. BIOS default value suggest to "Auto".

IDE DMA transfer access
This item allows user to adjust IDE DMA mode. It will increase IDE Data transfer
of speed. BIOS default value suggest to "Disabled".

IDE HDD Block Mode
This item allows enabled or disabled that IDE block data transfer mode. It will
speed up HDD data transfer of efficiency. BIOS default value suggest to
"Enabled".

KBC input clock
[Auto]
[Auto]
[Auto]
[Auto]
[Disabled]
[Enabled]
[12 MHz]
35 PCA-6743 User Manual