Ethernet Connector (Lan1); Network Boot; Front Panel Lan Indicate Connector (Lanled1) - Advantech PCA-6743 User Manual

Dm&p vortex86dx-800mhz soc, isa half-size sbc, ttl, 10/100 ethernet, cfc, on board memory

Hide thumbs Also See for PCA-6743:

Table of Contents

2.13

Ethernet connector (LAN1)

The PCA-6743 is equipped with a high performance 32-bit PCI-bus Fast Ethernet

interface which is fully compliant with IEEE 802.3u 10/100Base-T specifications. It is

supported by all major network operating systems.

2.13.1

The network boot feature is built into the BIOS. It can be enabled or disabled in the

chipset setup of the CMOS configuration. Refer to "BIOS Setting" in Chapter 3 for

more information.

2.14

This LED is active for LAN connects; PCA-6743 provides an external LAN LED Pin

header for connecting to the front side of the chassis. With this convenient design

users may know whether the LAN port is acting or not easily. Refer to Appendix A for

detailed information on the pin assignments.

PCA-6743 User Manual

Table of Contents