Assembly And Set Up - Sitec Delta Operator's Manual

...keeping you secure

3. Assembly and Set Up

The individual components have pluggable connecting leads. The plugs are colour coded and
should be plugged into the corresponding sockets.
The connectors have a variety of contact configurations, thus preventing the individual leads
from being mixed up, provided they are not pushed forcefully into the wrong sockets.
The electrical installation of the intercom and its components should only be carried out with
mains disconnected (remove mains adaptor plug from socket).
Overview of Central Control connections:
Extension Socket Main Control Mains Adaptor Signal Amplifier
Socket Socket Sockets
External Microphone External Loudspeaker LED Accessory Sockets
Socket Socket Current
The external loudspeaker and external microphone should be as far away from each other as
possible and should not be installed directly opposite each other, in order to avoid feedback.
The microphones should be set up or installed at speaking height if possible.
There is more information on connecting accessories (call button, door opener) from page 31
onwards.
9
Version 1.2