Special Functions; Receiving Calls - Sitec Delta Operator's Manual

...keeping you secure

4. Special Functions

Depending on the DELTA intercom's configuration (number of extensions, accessories
connected), the following functions can be carried out, using the function buttons on the main
control.

4.1 Receiving Calls

If several extensions are connected to the intercom, use the "call receive" button to connect to
a specific extension.
Note: The extensions need to have been activated using menu function 9 in the set up menu,
as otherwise there will only be a connection to the first extension. Please see page 29 for
further information.
confirm
The employee can now communicate with the customer via the selected extension. This
connection remains in place until another extension is selected using the same method.
If you do not need to switch to another extension, you can leave switch mode again by
pressing the "external volume" button. If no other button is pressed in the next 10 seconds,
then the intercom automatically leaves switch mode.
The volume and attenuation levels can be set individually for each extension. The levels set
are automatically stored and applied when a connection is made to the required extension.
Version 1.2
Use the + and – buttons to select the extension to
select
which a connection is to be established.
The number of the selected extension (e.g. no. "2")
flashes faintly, alternating with the dark number of
the current connection (e.g. no. "1").
Press the on/off button to confirm the connection
to the selected extension.
18