Cancelling Standby Mode; Switching Off The Intercom - Sitec Delta Operator's Manual

...keeping you secure

2.3 Cancelling Standby Mode

press
The intercom is now ready to operate and employee and customer can communicate with each
other. Standby mode can also be cancelled automatically and depends on the set up in menu
function 4 in the set up menu. Further information can be found on page 27.

2.4 Switching Off the Intercom

Press and
hold
The intercom can be switched off from either 'on' mode or 'standby' mode. This function
should be used when the intercom is not to be used for several hours, e.g. at closing time. The
intercom can be switched on again at any time by pressing briefly on the on/off button.
Version 1.2
Briefly press the on/off button.
The button changes from a flashing light to a fixed
light, indicating that the intercom is ready to operate.
The swan-neck microphone ring also lights up to show
that it is functioning.
Press the on/off button for longer than 2 seconds.
The light on the button goes out, indicating that the
intercom is switched off.
The light on the swan-neck microphone ring goes out.
14