Intercom Set Up; Accessing The Set Up Menu - Sitec Delta Operator's Manual

...keeping you secure

Intercom Set Up

1. Accessing the Set Up Menu

The Delta intercom has a set up menu in order to be best suited to the local operating
conditions.
The set up menu is divided into 10 menu functions (0-9).
The first 4 menu functions (0-3) can be set up separately for each extension.
This means that the connection to the appropriate extension must be selected before calling up
the set up menu. Menu functions 4-9 are the same for all extensions. If they are to be changed,
it is immaterial which extension is connected at that moment.
To access the set up menu and make changes, the following steps should be followed:
confirm
Version 1.2
press
Press the + and – buttons simultaneously for
simultaneously
about 2 seconds.
A "0" appears in the LED display with a
flashing dot.
The individual menu functions can be selected using
select
the + and – buttons.
The menu function in question is indicated by the
number (in this case "7") and the flashing dot.
To call up the set up of the menu function in
question, press the "attenuation" button.
The LED display now shows the chosen value (in
this case "0"), and the flashing dot is no longer
shown.
22