Table of Contents
Advertisement
...keeping you secure
2. Operating the Intercom
The following details refer first of all to an intercom with one main control and one extension
whose condition is as delivered.
Any operating functions which differ are explained in detail from page 18.
2.1 Switching the Intercom On
press
The intercom is now ready to operate and employee and customer can communicate with each
other.
2.2 Switching the Intercom to Standby Mode
press
The intercom is now in standby mode. Communication in both directions is interrupted and
conversations are no longer transmitted.
As the extension call button (gong) continues to operate even in standby mode, it is sensible
to use this function to switch off the intercom meanwhile, if there is no customer there. A new
customer can call the employee's attention at any time using the call button.
The intercom can also be switched to standby mode automatically and depends on menu
function 5 in the set up menu. Further information is on page 27.
Version 1.2
Briefly press the on/off button.
When the button lights up, it indicates that the system
is ready for operation.
The ring on the swan-neck microphone also lights up
as a check that it is functioning.
Briefly press the on/off button.
The button light changes from a fixed light to a
flashing light, thereby indicating standby mode.
The light on the swan-neck microphone ring goes out.
13
Advertisement
Table of Contents
