Announcements/Paging; Mute - Sitec Delta Operator's Manual

...keeping you secure

4.4 Announcements/Paging

For as long as this button is pressed, either the volume to the extension which is connected at
that time is increased, or you are switched to a separate paging loudspeaker, which may e.g.
be in a waiting room.
This depends on the configuration of menu point 6 in the set up menu; further information is
on page 28.
This function allows the employee to make an announcement or to call the next customer.

4.5 Mute

This button allows the employee temporarily to mute communication from inside to out, so
that the customer cannot hear what is being said on the inside. Mute is activated either by
pressing the button briefly, or for as long as the button is held down. This depends on the
configuration of menu function 0 in the set up menu; further information can be found on
page 24.
This button can also be used to speak by the employee when the intercom is in alternating
speech mode.
Version 1.2
As long as the "Announcements/Paging" button is
pressed, either the volume of the extension
hold
increased, or the announcement goes via a separate
loudspeaker, which could e.g. be in a waiting room.
press or
Pressing the "mute" button halts communication
hold to
speak
between inside and outside. Pressing the button
again cancels the mute.
In alternating speech mode, the employee can use
this button to speak.
21