Table of Contents
Advertisement
...keeping you secure
3.7 Menu function 6 - Loudspeaker during Announcements
This menu function is used for setting whether the extension volume is increased when the
"Announcements/Paging" button is pressed, or whether the announcement should be
channelled through a separate announcement loudspeaker.
If the function has been activated, announcements always go through a separate
announcement loudspeaker, regardless of the extension to which you are currently connected.
It is not possible to activate announcements through the loudspeaker of the individual
extension, even if the "Announcement/Paging" button is pressed.
If this function is disabled, announcements can be directed to each extension individually.
0:
Announcement goes through the loudspeaker of the extension to which
you are currently connected, with increased volume.
1:
Announcement goes exclusively through a separate announcement
loudspeaker.
3.8 Menu function 7 - Headset with Loudspeaker
This menu function controls whether the customer's voice sounds in the earphones or in the
loudspeaker of the main control when a headset is being used. The swan-neck microphone at
the main control is always switched off when a headset is used.
This function applies equally to all the connections to the individual extensions.
0:
The customer's reply is heard through the headset earphones.
1:
The customer's reply is heard on the loudspeaker of the main control.
This function gives the option of connecting a
lapel microphone or a neck microphone.
3.9 Menu function 8 - Set Attenuation
This menu function sets whether the attenuation can be modified.
This function should usually always be disabled so that the attenuation cannot be altered
unintentionally.
This function applies equally to all the connections of the individual extensions.
0:
Attenuation cannot be set (disabled).
1:
Attenuation can be set.
Version 1.2
28
Advertisement
Table of Contents
