Safety Instructions - Sitec Delta Operator's Manual

...keeping you secure

3. Safety Instructions

The DELTA intercom is modular. The electrical connections between the individual
components are pre-assembled, colour-coded and pluggable. The connectors have differing
contact configurations, so that the individual leads cannot be incorrectly connected, provided
force is not used to plug them into the wrong sockets.
Any changes to the cabling must be carried out with the system switched off (take the mains
plug out of the socket).
The intercom system should only be operated with SITEC's components and accessories.
WARNING:
The intercom MUST only be run using the mains adaptor we supply.
If a different one is used, it could cause dangerous touch voltage and electric
shocks.
The intercom must NEVER be connected directly to the mains without the
adaptor.
If another manufacturer's products are connected and used in the intercom or in one of its
components, we cannot then guarantee the electrical safety and the operational safety of the
unit.
The intercom and its components should not be opened up under any circumstances.
The intercom and its components should be protected from extreme heat, cold and careless
handling.
The intercom has been designed for use in dry areas indoors only, although certain
components (loudspeakers, microphones) can also be operated outdoors. Please contact our
customer service for further information.
The intercom and its components must be protected from damp: no fluid should enter the
parts under any circumstances.
If the intercom or its components are brought from a cold room into a warm one,
condensation can arise. A two-hour acclimatisation period should be allowed before operating
the unit.
5
Version 1.2