Table of Contents
Advertisement
Chapter 8. Operation
5. Activate the rear stabilisers and level the
machine using the level bubble (see Figure
8.5).
CAUTION
Before raising the boom ensure all four foot
plates are in full contact with the ground and
that they are clear of manhole covers, drains
and unstable ground etc.
The boom can now be operated in the normal
manner
Raising the 'self level' stabilisers
manually
The booms must be in the stowed position.
Hold switch 'ON' (down) while each individual
switch ‚ (see Figure 8.7) is pushed upward, one at
a time, until all four stabilisers are completely up in
their stowed position.
page 8 - 4
Starting From Platform Control Box
Before you begin to operate the MHP15J from the
platform control box, a qualified operator must per-
form the "Pre-operational Inspection" as described
in chapter 7, of this manual.
To start the engine from the platform control box
you must first set some switches on the ground
control box, including setting the stabilisers and
leveling the machine.
(See page 8-2 for information on setting the stabi-
lisers)
1. Insert the key into the Master Key Switch
at the ground control box and turn the key on
(see Figure 8.8).
Figure 8.8
2. Set the Platform/Ground Selector € (see
Figure 8.8) at the ground control box to
PLATFORM.
Figure 8.9
MHP15J – 11995A
Advertisement
Table of Contents
