Table of Contents
Advertisement
Figure 7.14 - Chassis Welds
Pay particular attention to the chassis welds
Figures 7.15 - Boom Welds
Closely inspect boom welds all the way around, for
cracks.
Lanyard Anchor Points
Figure 7.16 - Lanyard Anchor Points
Visually check the lanyard anchor points to see that
they are not deformed or cut off.
MHP15J – 11995A
Chapter 7. Pre-operational Inspection
Platform Gravity Gate
Figure 7.17 - Platform Gravity Gate
Check to see that the gravity gate is present and
functions correctly.
Platform Guardrails
Figure 7.18 - Platform Guardrails
Visually inspect the platform guardrails to see that
none of the tubing has been cut out, removed, or
deformed in any way.
Visually check the guardrail welds to see that none
is cracked nor ground down.
page 7 - 5
Advertisement
Table of Contents
