Installing The Dimm Air Duct - IBM x3400 7975 Problem Determination And Service Manual

6. Push the air duct up toward the rear of the power supply cage. Once the locator

Installing the DIMM air duct

To install a replacement DIMM air duct, complete the following steps:
1. Let the locator pins on the end of the air duct hang over the end of the power
2. Slide the air duct down the power supply cage till the pins lock in place and the
3. Using the four screws to secure the air duct to the power supply cage.
DIMM air duct
pins are free of the power supply cage you can remove the air duct from the
server.
supply cage.
mounting holes in the air duct match up with the screw holes in the power
supply cage.
Chapter 4. Removing and replacing server components
139