NetModule NB3711 User Manual page 154

Parameter
Full virtualization
Paravirtualization
General settings:
Parameter
Administrative status
The following parameters can be used to configure a virtual guest:
Parameter
Type
Description
Storage
After having set up the guest you are required to install your favourite root filesystem
to the path shown and restart the guest afterwards. Please note that the binaries have
to be compatible with our CPU architecture (armv7l). We can provide various tailored
Linux distribution images (such as Debian) on demand.
Communication to and from the guest can be achived by defining network interfaces
which can be either routed towards the guest or bridged with a LAN interface:
Parameter
Guest interface
Mode
Address
Netmask
Gateway
NB3711 User Manual 4.0
Virtualization Techniques
Full virtualization provides virtual machines which imple-
ment a complete simulation of the underlying hardware.
The guests run unmodified on a hypervisor and provide their
own kernel and user-space.
The virtual machine does not simulate hardware, the guest
accesses hardware over a hypervisor interface.
Virtualization Settings
Defines whether virtualization is enabled or not
Guest Settings
Defines which virtualization technique is being used
The description of the guest
Specifies the storage device on which the root filesystem of
the guest will be located
Guest Networking
The name of the interface inside the guest
The network mode for this interface (either routed or
bridged)
The IP address of the interface inside the guest
The netmask of the interface inside the guest
The gateway used inside the guest which is also set on the
host interface
154