Chapter 2: Camera Configuration; Accessing The Camera's Configuration Menu (Graphical User Interface); Installing Ip-Finder Software - Nexcom NCr-661-VHA User Manual

Chapter 2: Camera Configuration

C 2: C
haPter amera
Accessing the Camera's Configuration
Menu (Graphical User Interface)
The camera's default IP address is 192.168.1.168, make sure the IP address
of the computer accessing the camera is on the same network subnet
before proceeding.
You can access the camera via a web browser or IP-FINDER software. The
following information outlines the instructions for each method.
Copyright © 2017 NEXCOM International Co., Ltd. All Rights Reserved.
C
onfIguratIon
10

Installing IP-FINDER Software

Note: If IP-FINDER is already installed, you can skip this section and continue
to the next section IP-FINDER on page 12.
1. Download the IP-Finder installer file.
2. Unzip the IP-FINDER file to a location on the hard drive.
3. Once unzipped, double click on the setup file to start the installation
program.
4. Click the Next button on the welcome screen to continue.
Next button
NCr-661-VHA and NCr-662-VHA User Manual