Chapter 2: Camera Configuration; Accessing The Camera's Configuration Menu (Graphical User Interface); Installing Nexcam Assistant - Nexcom NCo-301-VHR User Manual

Chapter 2: Camera Configuration

Chapter 2: Camera Configuration
Accessing the Camera's Configuration
Menu (Graphical User Interface)
The camera's default IP address is 192.168.1.168, make sure the IP address
of the computer accessing the camera is on the same network subnet
before proceeding.
You can access the camera via a web browser or NexCam Assistant
software included with the camera. The following information outlines the
instructions for each method.
Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved.

Installing NexCam Assistant

Note: If NexCam Assistant is already installed, you can skip this section and
continue to the next section NexCAM Assistant on page 9.
1. Locate the installation file NexCamAssistant-Setup.msi on the CD.
2. Once located, double click on the file to start the installation program.
3. Click the Next button on the welcome screen to continue.
6
Next button
NCo-301-VHR User Manual