Event - Alarm Handler; Alarm Handler Configurations; Alarm Schedule Settings - Nexcom NCr-661-VHA User Manual

Chapter 2: Camera Configuration

Event - Alarm Handler

Copyright © 2017 NEXCOM International Co., Ltd. All Rights Reserved.

Alarm Handler Configurations

Enable
Enables or disables the alarm schedule setup.

Alarm Schedule Settings

S
Press S for a particular weekday to set up a 24-hour schedule automatically.
D
Press D for a particular weekday to clear all the previous scheduled settings
automatically.
Configure the scheduled time by holding down the mouse button and
clicking the time block to enable the schedule settings on the selected time.
A light blue color on the time block indicates that the alarm schedule is
enabled, while a light grey color indicates that the alarm schedule is disabled.
Alternatively, you can manually enter numbers to configure the hours and
minutes from start to end for all weekdays.
Save
Save button to apply the configurations, click on this button once all the
settings are confirmed for the new changes to take effect.
Close
Press to leave this schedule setting page.
52
NCr-661-VHA and NCr-662-VHA User Manual