Chapter 2: Camera Configuration; Accessing The Camera's Configuration Menu (Graphical User Interface); Installing Ip-Finder - Nexcom NCm-301-V User Manual

Chapter 2: Camera Configuration

C 2: C
haPter amera
Accessing the Camera's Configuration
Menu (Graphical User Interface)
The camera's default IP address is 192.168.1.168, make sure the IP address
of the computer accessing the camera is on the same network subnet
before proceeding.
You can access the camera via a web browser or IP-FINDER software included
with the camera. The following information outlines the instructions for
each method.
Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved.
C
onfIguratIon
5

Installing IP-FINDER

Note: If IP-FINDER is already installed, you can skip this section and continue
to the next section IP-FINDER on page 8.
1. Locate the installation file IP-FINDER-Setup.msi on the CD.
2. Once located, double click on the file to start the installation program.
3. Click the Next button on the welcome screen to continue.
Next button
NCm-301 User Manual