Image - Privacy Zone; Configurations - Nexcom NCr-661-VHA User Manual

Intelligent digital security ip camera

Table of Contents

Chapter 2: Camera Configuration

Image - Privacy Zone

Configures which area of the video stream will be masked for privacy. There

are 5 privacy zones that can be configured.

1. Select ON to enable Privacy Zone function. The default is OFF.

2. Select the area to set the privacy zone by holding down the mouse

button and drag to make a rectangular square, release the button once

the desired area is covered.

3. Press the Set Area button for the setting to take effect. The masked

area will be filled with black and the label Mask will be seen on the

video stream.

4. Press the Del Area button or select OFF to delete the privacy zone.

NCr-661-VHA and NCr-662-VHA User Manual

Table of Contents

Ncr-662-vha