Kustom Signals Falcon HR Operator's Manual page 92

The next series of lines are the lock records. Each lock
record will show: the number of the lock, the locked target
speed, and the minute the lock occurred in the current date
record. The third line in the example shows this is the first
lock in the DataLogger, the target speed was 57, and it
th
occurred in the 4
A.5 TALONDL PC SOFTWARE
KSI provides TALONDL software to interface with a
FalconHR that has the DataLogger feature. The FalconHR
unit needs to be connected to the PC serial port using a
Talon to PC cable KSIPN# 155-3139-00. The TALONDL
software allows the operator to:
1. Get the FalconHR unit s serial number.
2. Get the number of locks stored in the FalconHR s
DataLogger.
3. Get the FalconHR s internal time and date.
4. Set the time and date in the FalconHR unit.
5. Download the FalconHR DataLogger memory.
6. Clear the FalconHR DataLogger memory.
The TalonDL HELP menu describes the operation of the
software.
"
minute of the current date record.
A.6