Kustom Signals Falcon HR Operator's Manual page 27

Hide thumbs Also See for Falcon HR:
Table of Contents

Advertisement

The remote controls the following functions:
A. HOLD
B. SAME/OPP
C. MODE
D. LOCK/REL
E. FAST
F. PAT SEL
(Patrol Select)
G. IR Transmitter
H. Screw Release
Turns the radar transmitter on and
off.
In moving mode, selects either the
same or opposite direction. In
stationary mode this button toggles
between approaching only and
receding only modes.
Rotates through the four modes of
operation.
1. Moving Mode.
2. Stationary ALL.
3. Stationary Approaching only.
4. Stationary Receding only.
Alternately Locks and Releases the
target and patrol speeds.
Turns fastest vehicle mode on or off.
NOTE: Fastest can be operated one
of two ways. See Sec. 14,
Options, for details.
Blanks or recalls a locked patrol
speed. Also used for setting
minimum patrol speeds and
synchronizing the speedometer input.
Two IR transmitter LEDs.
Screw fastener to allow access into
the battery compartment.
4.6

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents