Elcometer 407L User Manual page 5

3 GETTING STARTED (CONTINUED)
3.2 SELECTING THE LANGUAGE
1 Select Menu/Setup/Instrument Setup
2 Press the or
3 Press the navigation button to scroll through the available languages until the required
language is displayed.
3.3 SETTING THE DATE AND TIME
1 Select Menu/Setup/Instrument Setup
2 Press the or
3 Press the navigation button and adjust the date and time following the on screen prompts.
3.4 SETTING THE MEASUREMENT PARAMETERS
Via Menu/Setup/Measurement Menu users can select which measurement values are displayed:
Geometry: Display gloss readings at 1*, 2* or 3 gloss angles
Range: Select AUTO (full scale) or BLACK (standard gloss scale) or MIRROR (extended scale
for highly reflective materials, polished metals, requires calibration using Mirror
Standard).
3.5 SETTING THE PASS/FAIL MEASUREMENT PARAMETERS
Via Menu/Setup/Measurement Menu/Pass/Fail Users can enable on-screen pass/fail indication and
set measurement criteria.
1 Select Menu/Setup/Measurement Menu/Pass/Fail
2 Press the or
3 Press the navigation button to edit the pass and fail criteria.
*
Dual and Triple Angle Glossmeter - 60
†
Triple Angle Glossmeter only - 20° & 60° & 85°
4
navigation button to highlight "Language". Press
navigation button to highlight "Set Date & Time" followed by
navigation button to highlight "Pass/Fail", followed by
°,
20° & 60°
†
to select.
to select
to enable
www.elcometer.com
R