Table of Contents
Advertisement
R
6 BATCHING (CONTINUED)
6.4 CREATING USER DEFINED BATCH NAMES
1
Connect the instrument to a PC using the USB cable supplied
2
Double click on the USB data folder "IQ Meter". This can be accessed in Windows via "MY
COMPUTER", within this file open CONFIG>Batches. This document is a .csv file and can be
opened/edited in programs such as Notepad, Excel or Wordpad. User defined names should
entered into this document with each name listed on a separate line. The batch name length is
limited to 8 letters or numbers, further characters are not included the description
3
Switch OFF and ON to transfer the new batch names to the gauge
4
Select Menu/Setup/Data and Batch Menu
5
Press the
or
required name from those stored in the gauge.
www.elcometer.com
navigation button to highlight "Batch Name" followed by
to select the
9
Advertisement
Table of Contents
