Table of Contents
Advertisement
About this manual
What this chapter contains
This chapter describes the intended audience and contents of the manual. It
contains a flowchart of steps in checking the delivery, installing and commissioning
the drive. The flowchart refers to chapters/sections in this manual and other
manuals.
Target audience
This manual is intended for people who plan the installation, install, commission, use
and service the drive. Read the manual before working on the drive. The reader is
expected to know the fundamentals of electricity, wiring, electrical components and
electrical schematic symbols.
The manual is written for readers worldwide. Both SI and imperial units are shown.
Special US instructions for installations within the United States that must be
installed per the National Electrical Code and local codes are marked with (US).
Common chapters for multiple products
Some chapters in this manual apply to several products including the ACS800-37.
Other product types may be mentioned in these chapters.
Categorization according to the frame size
Some instructions, technical data and dimensional drawings which concern only
certain drive frame sizes are marked with the symbol of the frame size (such as
"2×R8i", etc.). The frame size is not marked on the drive designation label. To
identify the frame size of your drive, see the rating tables in chapter
Contents
The chapters of this manual are briefly described below.
Safety instructions
operation and maintenance of the drive.
About this manual
The ACS800-37
Mechanical installation
Planning the electrical installation
protective functions of the drive, and cable routing.
Electrical installation
gives safety instructions for the installation, commissioning,
introduces this manual.
describes the drive.
instructs how to move, place and mount the drive.
provides advice on motor and cable selection, the
describes the cabling and wiring of the drive.
19
Technical
data.
About this manual
Advertisement
Chapters
Table of Contents
