Table of Contents
Advertisement
Section 2
Specifications and Performance
Setting Switch
Setting
SW1-1
SW1-2
SW1-3
SW1-4
Set SW1-1 on the V680-H01-V2 Antenna and the Controller as shown in the following table.
Antenna setting
V680-H01-V2
SW1-1: OFF
SW1-1: ON
: Cannot be used.
: Can be used.(Controller setting not required.)
Note: The high-speed mode cannot be used by the controller's setting.
Differences between the V680-H01 and the V680-H01-V2
As shown in the following table, the V680-H01-V2 supports additional maintenance functions.
Turn ON SW1-1(Antenna) when using the V680-CA1D/CA2D.
Communication Test Mode
Noise Level Measurement
Mode
Distance Level Measurement
Mode
Speed Level Measurement
Mode
Communications Success
Rate Measurement Mode
RFID System
28
User's Manual
Controller selection
OFF:V680-CA5D01-V@, CS1W-V680C11, or CJ1W-V680C11
ON: V680-CA1D/-CA2D
Reserved by System (Always set this Switch to OFF.)
Reserved by System (Always set this Switch to OFF.)
Reserved by System (Always set this Switch to OFF.)
V680-CA5D01-V@
SW4-8: OFF
SW4-8: ON
See Note.
display functions
Setting switch protection cover
Note: Please attach a setting switch protection cover after setting switch.
Function
Controller setting
CS1W-V680C11
CJ1W-V680C11
DM20000 + 100 × m+3=0000
DM20000 + 100 × m+3=0001
V680-H01-V2
SW1-1: OFF
SW1-1: ON
OK
OK
OK
OK
OK
Default setting
V680-CA1D
V680-CA2D
See Note.
See Note.
V680-H01
no switch
OK
OK
NO
NO
NO
NO
NO
NO
NO
NO
OFF
---
---
---
Advertisement
Table of Contents
