Omron V680-HA63A User Manual page 29

V680 series
Hide thumbs Also See for V680-HA63A:
Table of Contents

Advertisement

Operation Indicator
name
RUN
COMM
NORM
ERR
CNT-TYPE Yellow Lit when in V680-CA@D Controller connection mode (SW1-1 setting: ON).
TAG-TYPE Yellow For expansion (not used): Always OFF.
LV6/7D
LV5/7A
LV4/76
LV3/72
LV2/71
LV1/70
The distance level will vary greatly depending on the surrounding environment. The setting position will serve as a
guide, but use RUN mode to conduct a sufficient number of tests in the actual operating environment.
Values of distance level 4 or above may not be displayed, but this will not affect the RUN mode performance and does
not indicate a malfunction.
Differences between the V680-H01 and the V680-H01-V2
As shown in the following table, the V680-H01-V2 provides additional indicators.
Turn ON SW1-1(Antenna) when using the V680-CA1D/CA2D.
display functions
RUN (POWER/COMM)
COMM (POWER/COMM)
NORM
ERR
CNT-TYPE
TAG-TYPE
LV6/7D
LV5/7A
LV4/76
LV3/72
LV2/71
LV1/70
Color
Green Lit when the power is ON.
Yellow Lit when a command is being sent.
Green Lit when communications with a Tag are normal in Normal Communications Mode.
Red
Lit when an error occurs in communications with a Tag in Normal Communications
Mode.
Yellow Maintenance Mode: Lit at distance or speed level 6.
Normal Communications Mode: Lit when a write protection error occurs.
Yellow Maintenance Mode: Lit at distance or speed level 5 or higher.
Normal Communications Mode: Lit when an address error occurs.
Yellow Maintenance Mode: Lit at distance or speed level 4 or higher.
Normal Communications Mode: Lit when a Tag memory error occurs.
Yellow Maintenance Mode: Lit at distance or speed level 3 or higher.
Normal Communications Mode: Lit when a no Tag error occurs.
Yellow Maintenance Mode: Lit at distance or speed level 2 or higher.
Normal Communications Mode: Lit when a verification error occurs.
Yellow Maintenance Mode: Lit at distance or speed level 1 or higher.
Normal Communications Mode: Lit when a Tag communications error occurs.
V680-H01-V2
SW1-1: OFF
OK
OK
OK
OK
OK
---
OK
OK
OK
OK
OK
OK
Specifications and Performance
Meaning
V680-H01
SW1-1: ON
no switch
OK
OK
NO
NO
OK
---
NO
NO
NO
NO
NO
NO
Section 2
OK
OK
NO
NO
NO
---
NO
NO
NO
NO
NO
NO
RFID System
27
User's Manual

Advertisement

Table of Contents
loading

Table of Contents