Smart Timer - Castle group dBAir Operating Manual

Smart Timer

The dBAir sound meter allows the use of two simultaneous Smart Timers where the
user can select the Start/Stop day and the Start/Stop times.
Smart Timers can be used with or without Time History enabled.
The settings can be amended as shown below: -
Start: (Day, Hours, Minutes)
• Day:
• Hours:
• Minutes:
Stop: (Day, Hours, Minutes)
• Day:
• Hours:
• Minutes:
The Data Recording screen shows the Total Record Time if Day is not set
to Any
Timer will not be started until the Record key is pressed whilst in the
measurement screen
THE INSTRUMENT HAS TO BE ON FOR ANY TIMER TO OPERATE
Any, Mon, Tue, Wed, Thu, Fri, Sat, Sun
00 to 23
00 to 59
Any, Mon, Tue, Wed, Thu, Fri, Sat, Sun
00 to 23
00 to 59
50