Wifi Networks - Castle group dBAir Operating Manual

WiFi Networks

Allow several seconds for your dBAir to discover any networks. The network name is
displayed with the connection type or status underneath and the networks signal
strength.
Scroll the available networks using the Up or Down Arrow keys.
Press OK to select a network and enter the password up to a maximum of 16
characters if the network requires it: -
Scroll the available options using the Up or Down Arrow keys, by default Upper Case is
selected.
Use the Left, Right Arrow keys to adjust the character as required: -
• Upper Case: A to Z
• Lower Case: a to z
• Numeric: 0 to 9
• Special Characters: SPACE ! " # $ % ' & * + ( ) , - . / : ; < = > ? @ [ \ ] ^ _ ` { | } ~
Press the OK key move to the next character and repeat the steps until you have
successfully entered the correct password.
Use Soft Key 2 labelled Delete to delete the highlighted character if required.
Use Soft Key 1 to exit password entry without saving.
When the password is entered correctly select Connect and press the OK key: -
92