Data Recording - Castle group dBAir Operating Manual

Data Recording

Select Data Recording to determine if the data recording should contain a time history
and if used which time interval periods are to be used.
The instrument records over the time periods determined by the Time History settings
in conjunction with the settings made within the Timer Selection or by the user manually
stopping the recording.
If a recording period can be calculated by the instrument this will be shown as the Total
Record Time
Selections made within the Timer Selection where the instrument can calculate the
record time, this will be shown on the Data Recording screen as the Total Record Time.
If no settings are made with Timer Selection, then Not Set will be shown and if
calculations of the record time can't be made then Not Known will be shown.
Scroll the available options using the Up or Down Arrow keys.
Press OK or the Left, Right Arrow keys to toggle Time History On.
Use the Left or Right Arrow keys to amend the values for Short Time Interval and Long
Time Interval.
Press the OK key to select Timer Selection.
45