Auto Dim; Enable Screen Shot - Castle group dBAir Operating Manual

Sound level meter
Table of Contents

Advertisement

Auto Dim

The Auto Dim feature will automatically dim the screen to after a set period of time to
reduce operating power and increase battery run time.
Use the Left, Right Arrow keys to adjust the Auto Dim as below: -
• Off or 1 to 15 (minutes) - 1m recommended
Press any key to exit the active auto dim function.

Enable Screen Shot

Press OK or the Left, Right Arrow keys to toggle Enable Screen Shot.
When screen shot is enabled the Power key can be pressed to capture and save the
current screen to the internal SD card.
All images are saved in .ppm format, a suitable editor such as 'Gimp' can be used to
save the file into other formats.
Gimp can be downloaded free at the following address: -
• https://www.gimp.org/
When Screen Shot is enabled the Power key cannot be used to reset parameters.
All saved screen shot files are accessible using the dBAir in USB Drive mode.
95

Advertisement

Table of Contents
loading

Table of Contents