5-Removing The Aesthetics - RED PERFORMA 25 Installation Manual

5-REMOVING THE AESTHETICS

Live electrical parts: only power the product once it has been fully assembled.
If any work is carried out on some components of the boiler or if you are just cleaning it, you need to remove the side panels.
To remove the right panel "D" proceed as follows:
• lift the tank cover "C"
• lift the front cover "B"
• open the decorative door "A"
• remove the two top screws "x" that secure the panel "D" to the boiler
• lift the panel "D" and let the joints "k" come out of the holes "y" on the structure of the boiler (see image on the following page)
B
A
Technical Dept. - All rights reserved - Reproduction is prohibited
C
x
D
y
25