Equipment Settings - Samsung 8340 User Manual

CHANGE How yoUR REMoTE CoNTRoL IS pRoGRAMMED
Changing the volume button:
When you program your remote control to your TV and audio system, the volume button will
work with the device that you programmed last. To control the volume via your TV or audio
system, please refer to the following instructions.
To control the volume via your TV:
1. Hold down and
buttons.
2. Press 9-9-3, The red light will blink twice.
3. Press 2.
To control the volume via your audio system:
1. Hold down and
buttons.
2. Press 9-9-3. The red light will blink twice.
3. Press 3.
RESETTING yoUR REMoTE CoNTRoL
If you would like to reprogram your remote control to other devices or if you are having
problems getting it to work, you can reset it by following these steps:
1. Hold down and
2. Press 9-7-7 on your remote control. The red light will blink four times to confirm that the
remote control has been reset.
EqUIpEMENT SETTINGS
This section will help you to configure your video and audio preferences so that you can get
the most out of your HD TV and new terminal.
Accessing your terminal preferences:
1. Press to go to the main menu.
2. Using , select Settings then Equipment Settings, then press
For further information, visit videotron.com/terminal-support.
16
until the red light beneath
until the red light beneath
until the red light beneath
blinks twice, then release both
blinks twice, then release both
blinks twice, then release both buttons.
.